Sota LightWorks High Intensity LED Light Unit is a professionally designed quality unit, thoroughly tested and guaranteed to operate as per the specifications.
The LightWorks High Intensity LED Light Unit is designed to generate an intense LED Light output using Constant-Current. The Hand Paddle has high intensity LEDs on both sides. One side has 60 x Red LEDs at a wavelength of 660nm. The other side of the Hand Paddle has 55 x high intensity Near-Infrared (NIR) LEDs at a wavelength of 880nm. There are also 5 x Red LEDs at 660nm wavelength on the NIR side of the paddle to indicate the NIR LEDs are working as NIR light is invisible to the human eye.
There are 8 different selectable Modes (A through G and Constant).
The LightWorks unit will output a steady (non-pulsed) beam of LED light when in Constant Mode.
Additionally, the LightWorks unit can pulse the LEDs at specific healing frequencies (Modes A through G).
Modes are selected with the ON/OFF/MODE button. The currently selected Mode is indicated by the appropriate Green Mode lights.
The unit starts up in the Automatic Cycle, running through each of the 8 Modes for 4 minutes per Mode. An Orange light on the base indicates the Automatic Cycle has been selected.
In the Manual Cycle the Constant Mode will stay on for 30 minutes, and Modes A through G will stay on for 15 minutes.
When the LightWorks unit has completed a Manual or Automatic Cycle, it will shut itself OFF.
A Hand Paddle Button on the base unit is used to select which side of the paddle is active.
Features of the LightWorks High Intensity LED Light Unit
Constant current of 20 milliamps per LED (Constant current ensures each LED has the same output and that each LED works under optimal electrical conditions.)
Very High Intensity LED Output. (Red LEDs output ~197 mW Total, and the NIR LEDs output ~228 mW Total)
Designed with RED @ 660nm as well as Near Infra-Red @ 880nm LEDs
Unit functions and Frequencies controlled by Micro-Computer
Hand Paddle connects to base unit with standard telephone cord
Compact and lightweight.
CE Certification
More about LightWorks High Intensity LED Light Unit:
The LightWorks High Intensity LED Light Unit is housed in a custom plastic enclosure. A pushbutton turns the LightWorks on and off. A series of Green Mode lights indicates which Mode the unit is in. You can select any of the Modes manually, or you can select AUTO and the unit will cycle through each of the Modes. An on-board Quartz Crystal-based Micro-Computer controls all unit functions and frequencies. After approximately 30 minutes of pulsing the LW1 will turn itself off. The LightWorks is packaged in a soft carrying case for easy storage.
The LightWorks is designed to the highest standards. We've designed The LightWorks from the ground up using the latest in electronic components. The result is a very powerful, reliable and rugged unit.
LightWorks High Intensity LED Light Unit Specifications;
Constant current of 20 milliamperes per LED (Constant current ensures each LED has the same output.)
60 x High Intensity Red LEDs at 660nm wavelength (+/- 10nm), Approximately 197mW Total Output
55 x High Intensity Near Infra-Red LEDs at 880nm wavelength (+/- 10nm), Approximately 228mW Total Output
Frequency tolerance: +/- 1Hz
Power Input: 12 Volts DC @ 1.0 Amps
Each LightWorks comes complete with:
The LightWorks LW1 unit
Operating Instructions
One (1) International AC-DC Wall Adaptor
0ne (1) Soft Carrying Case
3 Year Parts and Labor Warranty
